The Blogging of Webster 582

More recently a range of vinyl plank floors have been released with click together systems. This product is installed in a floating floor fashion but generally does not require an underlay. Raw Hybrid is a uniquely constructed engineered timber flooring product that boasts a raw or uncoated solid timber surface, allowing for complete control of the finished appearance. Both solid timber flooring and engineered timber flooring utilise the natural warmth and earthy feel of real timber and explore a diverse range of colours and finishes.
Something to consider before you decide on your flooring, is the surface finish you like. Prefinished boards have already been sealed so you don’t have to wait for the coating to dry. Solid strip flooring has the structural strength to be installed directly onto joists, battens or underply over concrete using hydro plank flooring review secret or top nailing methods. For most homes in the greater Perth area, timber will have an equilibrium moisture content of approximately 11%. In winter it will be slightly higher and in summer slightly lower. Before sanding commences, electricity must be operational in the house with lights working.

We’ve been the wholesale distributor of flooring in Sydney for more than 20 years now, and in that time we’ve worked with many different options. Perfect matching of timber across the whole floor because it is sanded on-site after installation. There is no mismatching of boards as is commonly seen with pre-finished products. For the eco-conscious consumer, raw French Oak engineered flooring brings a touch of the French forest right into their home, office or showroom. French oak timber panels capture the unmatched beauty of a naturally-grained hardwood timber because the forests of France provide the ideal growing conditions for producing tightly-grained hardwoods.
Then it’s crafted, or “engineered”, using a proven technology, to deliver a visually pleasing product. Carefully graded to include the most interesting and moderate features of Australiana grade flooring. This grade offers a minimum level of natural features best suited to a modern style. Graded to include the most interesting and moderate natural features to enhance the look of a timber floor.

Most prefinished engineered boards use a thin layer of real timber on top of inferior lower layers of wood substrate. Because the top layer is so thin (2 – 3mm) it’s much easier to dry to the right moisture level and prevent climate related movement in the board. Pre-finished timber should be engineered to prevent movement of the board. Solid timber flooring is too difficult to keep flat, even when put through the proper kiln drying process. Solid timber is just too thick to get the moisture level right to prevent the movement of the board.
But they both have their benefits and their drawbacks which is what we’re going to discuss with you below. Pre-sanded and unfinished, Hurford Flooring Elegant Oak’s Engineered Timber in Raw colour is an excellent option for anyone looking to staining and finishing their flooring on site. This engineered timber flooring is the choice for you if the other colour options in the Elegant Oak collection do not match your space. The Raw option can also keep the same lovely, bright appearance after sanding. This engineered timber product also has the high-quality features of all of the other Elegant Oak colours and uses beautiful French Oak timber.
Damp mopping approximately every 2 weeks provides an effective deep clean and when carried out with the recommended mild cleaners, will not harm the floor. Under no circumstances should steam mops be used on timber floors. With appropriate care you will enjoy your timber floor for many years. Solvent Sealers used with waterborne top coats tend to provide a more defined grain structure of the finished timber floor.

Floors installed in this method are generally a little softer under foot. Timber installed in this fashion must have a minimum thickness of 19mm to be structurally suitable to install over a batten system. Generally, there is no requirement to acclimatise prefinished timber floors such as laminate flooring, bamboo, or engineered flooring.
Prefinished timber floor products can be “lived on” virtually as soon as the installation has been completed. As the floor is not sanded and coated in a factory environment it is unrealistic to expect a similar finish to that of furniture. Some dust may be trapped in the finish even when appropriate precautions are taken.

To achieve a reduced transmission of noise to the apartments below it is common to install a rubber or cork underlay under a timber floor which provides a barrier against the transmission of noise. There is a wide range of acoustic barrier options including acoustic rated adhesives that can be considered for apartment installations. Yes, there is a noticeable difference in appearance between spotted gum timbers that are sourced from northern growing areas to the southern growing areas. Spotted Gum is sourced from the northern parts of Victoria all the way through New South Wales and into Southern Queensland. The timber commonly referred to a Queensland Spotted Gum has a much greater proportion of darker timbers, whilst the New South Wales timber has an overall lighter appearance. Most timber floors with a Janka hardness of 7 and above are suitable for timber flooring, however the harder the timber the more resistant it is to denting.